Dishes & Blades
Spinner Dish Assemblies are blades mounted on dishes and do not contain spinner motors. In order to ensure you get correct dishes and blades, please review the following:
- Dishes are Slightly Concave Unless Specified Flat
- Concave Dishes are Commonly Used for Fertilizer and Lime Spreading
- Flat Dishes are Commonly Used for Poultry Litter Amendment or Litter Spreading
- Right hand Dishes Rotate Counter Clockwise
- Left Hand Dishes Rotate Clockwise
- SS – 304 Stainless Steel
- MS – Mild Steel
- Verify Dishes on Delivery and Inspection Sheet in Manual or by Serial Number with NC Parts Department
- Dishes & Blade Material and Type Must NEVER be Mixed. Either All Stainless or All Mild Steel and All Standard or All Heavy Duty
Concave Dishes, Blades, And Assemblies
24″ Standard Universal Dish:
- 24″ Dish in 10 Gauge Stainless Steel
- Placement of Blades Makes Dish Left or Right Hand
24″ Heavy Duty:
- Heavier Gauge Stainless for Lime Spreading
- 24″ Dishes in 3/16″ Thick Stainless or Mild Steel, 6 Pairs of Holes
- Six Blades in 1/4″ Thick Stainless or Mild Steel
- Placement of Blades Makes Dish Left or Right Hand
24″ Extended Range (XRT):
- Dishes and Blades Allow for Spread Patterns Up to 80′
- 24″ Dishes in 3/16″ Thick Stainless
- Four Blades in 1/4″ Thick Stainless, 9″ long, 3 bolts
- Placement of Blades Makes Dish Left or Right Hand
| Part Number | Description | Blade Info |
|---|---|---|
| NC-025006MRH | Spinner Dish Assembly, Stainless Steel, 10 Gauge Dish & Blades | 6 Right Hand |
| NC-015006MRH | Spinner Dish Assembly, Mild Steel, 3/16″ Dish & 3/16″ Blades | 6 Right Hand |
| NC-025006MLH | Spinner Dish Assembly, Stainless Steel, 10 Gauge Dish & Blades | 6 Left Hand |
| NC-015006MLH | Spinner Dish Assembly, Mild Steel, 3/16″ Dish & 3/16″ Blades | 6 Left Hand |
| NC-025006PRH | HD Spinner Dish Assembly, Stainless Steel, 3/16″ Dish & 1/4″ Blades | 6 Right Hand |
| NC-015006ORH | HD Spinner Dish Assembly, Mild Steel, 3/16″ Dish & 1/4″ Blades | 6 Left Hand |
| NC-025006PLH | HD Spinner Dish Assembly, Stainless Steel, 3/16″ Dish & 1/4″ Blades | 6 Right Hand |
| 015006OLH | HD Spinner Dish Assembly, Mild Steel, 3/16″ Dish & 1/4″ Blades | 6 Left Hand |
| NC-025006VRH | HD Spinner Dish Assembly, Stainless Steel, 3/16″ Dish & 1/4″ Blades, Extended Range | 4 Right Hand |
| NC-015006VRH | HD Spinner Dish Assembly, Mild Steel, 3/16″ Dish & 1/4″ Blades, Extended Range | 4 Right Hand |
| NC-025006VLH | HD Spinner Dish Assembly, Stainless Steel, 3/16″ Dish & 1/4″ Blades, Extended Range | 4 Left Hand |
| NC-015006VLH | HD Spinner Dish Assembly, Mild Steel, 3/16″ Dish & 1/4″ Blades, Extended Range | 4 Left Hand |
| NC-025006A | Standard Spinner Dish Only, SS, 10 Gauge, Universal, 6 pairs of holes | 6 Blades Needed |
| NC-015006A | Standard Spinner Dish Only, MS, 10 Gauge, Universal, 6 pairs of holes | 6 Blades Needed |
| NC-025006Q | HD Spinner Dish Only, SS, 3/16″ Universal, 6 pairs of holes | 6 Blades Needed |
| NC-025006W | HD Spinner Dish, SS, 3/16″ Extended Range, Universal | 4 Blades Needed |
| NC-015006W | HD Spinner Dish, MS, 3/16″ Extended Range, Universal | 4 Blades Needed |
| NC-025007KRH | Std Spinner Blade Only, SS, 10 Gauge, RH | 6″ Blade Right Hand |
| NC-015007KRH | Spinner Blade Only, MS, 3/16″, RH | 6″ Blade Right Hand |
| NC-025007KLH | Std Spinner Blade Only, SS, 10 Gauge, LH | 6″ Blade Left Hand |
| NC-015007KLH | Spinner Blade Only, MS, 3/16″, LH | 6″ Blade Left Hand |
| NC-025007NRH | HD Spinner Blade Only, SS, 1/4″, RH | 6″ Blade Right Hand |
| NC-015007NRH | HD Spinner Blade Only, MS, 1/4″, RH | 6″ Blade Right Hand |
| NC-025007NLH | HD Spinner Blade Only, SS, 1/4″, LH | 6″ Blade Left Hand |
| NC-015007NLH | HD Spinner Blade Only, MS, 1/4″, LH | 6″ Blade Left Hand |
| NC-025007WRH | Spinner Blade Only, SS, 1/4″, Extended Range, RH | 9″ Blade Right Hand |
| NC-025007WLH | Spinner Blade Only, SS, 1/4″, Extended Range, LH | 9″ Blade Left Hand |
| BN-SSHH5161 | Bolt to Mount 1/4″ Blade onto Dish | |
| BN-SSHH51634 | Bolt to Mount 10 Gauge Blade onto Dish |
Flat Dishes, Blades, and Assemblies
- Flat Assemblies and Dishes are Not Concave
- 28″ Flat Dishes Commonly used to Spread Litter, Manure, Sludge (Models 30 and 31)
- 30″ Flat Dishes Commonly used to Spread Litter, Manure, Sludge, and Poultry Litter Amendment (Models 30, 31, 47PLT, and 54 PLT)
- Six Blades in 1/4″ Think Stainless
- Flat Dishes Require Special Requirements in Spreader Hydraulics. Check with NC Representative for Details.
- Placement of Blades Makes Dish Left or Right Hand
| Part Number | Description | Number of Blades |
|---|---|---|
| NC-015006XRH | 28″ Flat Spinner Assembly, MS, 1/4″ Dish & Blade | 6 Right Hand |
| NC-015006XLH | 28″ Flat Spinner Assembly, MS, 1/4″ Dish & Blade | 6 Left Hand |
| PM-015006Y | 28″ Flat Spinner Dish Only, MS, 1/4″ Universal | 6 Blades Needed |
| NC-015007XRH | 10 1/4″ Spinner Blade Only, MS, 1/4″, 3 Hole, Litter | 6 Right Hand Needed for 28″ Dish |
| NC-015007XLH | 10 1/4″ Spinner Blade Only MS, 1/4″, 3 Hole, Litter | 6 Left Hand Needed for 28″ Dish |
| NC-025006XRH | 30″ Flat Spinner Assembly, Right Hand, SS, 1/4″ Dish & Straight Blade | 6 Right Hand |
| NC-025006XLH | 30″ Flat Spinner Assembly, Left Hand, SS, 1/4″ Dish & Straight Blade | 6 Left Hand |
| PM-025006S | 30″ Flat Spinner Dish Only, SS, 1/4″ Universal | 6 Blades Needed |
| NC-025007URH | 11 1/4″ Spinner Blade, SS, 1/4″, Straight, RH | 6 Right Hand Blades Needed |
| NC-025007ULH | 11 1/4″ Spinner Blade, SS, 1/4″, Straight, LH | 6 Left Handed Blades Needed |
| NC-025007ABRH | 11 1/4″ Spinner Blade, SS, 1/4″, Top Angle, RH | 6 Right Hand Blades Needed |
| NC-025007ABLH | 11 1/4″ Spinner Blade, SS, 1/4″, Top Angle, LH | 6 Left Handed Blades |
| BN-SSHH5161 | Bolt to Mount 1/4″ onto Dish |