Lids, Valves, & Fittings
Standard Lids
Norwesco Tank Lids Valves, and Fittings come in a variety of sizes and with or without vents
| Item | Description | Vent Capacity (GPM) | Part Number |
|---|---|---|---|
| – | 22″ Lid and ring with air vent | 400 | 63679 |
| – | 22″ Lid, ventless with ring | 63863 | |
| Vent for 22″ lid | 64150 | ||
| – | 16″ Lid and ring with 4″ center lid/air vent | 100 | 60038 |
| A | 16″ Lid with 4″ center lid/air vent | 100 | 60011 |
| B | 16″ Lid and ring with blue snap-in vent | 200 | 63485 |
| – | 16″ Lid and ring with 3″ center thread | 63868 | |
| – | 16″ Ring only | 60012 | |
| – | 16″ Lid, ventless with ring | 60367 | |
| C | 16″ Lid, ventless | 60365 | |
| – | 4″ Lid (air vent assembly for 16″ lid (60038 and 60011) | 60019 | |
| – | Blue snap-in vent for 16″ lid (63485) | 63539 | |
| – | 8″ Lid, ring and air vent | 60032 | |
| D | 8″ Lid with air vent (For select tanks manufactured prior to 2/2/08) | 60002 | |
| – | 8″ Ring only (for 60002 lid) | 60003 | |
| – | Snap on air vent for 8″ lid only (60002) | 61727 | |
| E | 8″ Lid with blue snap-in vent (For select tanks manufactured after 2/2/08) | 200 | 63480 |
| – | Blue snap-in vent for 8″ lid (63480) | 63482 | |
| F | 5″ Lid with ball check air vent (for tanks manufactured prior to 2/1/00) | 60322 | |
| G | 5” Lid with ball check air vent (for tanks manufactured after 2/1/00) | 63484 | |
| – | 5″ Lid with 2″ FPT (does not include vent cap) | 63264 | |
| – | 5″ Lid, hinged (for 52 & 68 gallon flat bottom & 110 low profile) | 63673 | |
| – | EPDM gasket for 5″ lid, 60322, 63264 or 63484 | 60366 | |
| – | 18″ lanyard for 8″ lid and 16″ non-hinged lid (tethers lid to tank) | 62531 | |
| – | Ethafoam gasket for 16″ non-hinged lid | 62941 | |
| – | Stainless steel screw for 8″ and 16″ rings | 60081 | |
| – | Strainer basket for 16″ fill-opening (7″ depth) | 67374 |
Hinged Lids
The hinged lid is manufactured from a co-polymer material for strength, durability and excellent chemical resistance. Norwesco’s unique locking tab allows you to easily slip a padlock through it and secure your lid from theft or spills. The lid is interchangeable with a standard 22″ or 16″ lid and ring assembly if you choose to replace your existing lid.
Features of Hinged Lid:
- Easy open/close – opens a full 180 degrees
- Comes complete with a baffle vent assembly which allows for adequate venting when bottom filling your tank
- Unique locking tab
- All parts of lid may be ordered as repair parts
| Description | Vent Capacity (GPM) | Part Number |
|---|---|---|
| 22″ Hinged lid with ring & vent | 250 | 63874 |
| 22″ Hinged ventless lid, with ring | 64190 | |
| 16″ Hinged lid with ring & vent | 100 | 62532 |
| 16″ Hinged lid with vent assembly, without ring | 100 | 62826 |
| 16″ Hinged ventless lid, with ring | 63390 |
16″ Hinged Lid Repair Parts
| Description | Part Number |
|---|---|
| Vent assembly | 62827 |
| Ring assembly | 62828 |
| Hinge Assembly | 62829 |
| EPDM O-ring gasket for 16″ hinged lid | 62830 |
| Neoprene O-ring for 16″ hinged lid ring | 62831 |
Bulkhead Fittings
Norwesco’s polypropylene fittings come standard with an EPDM gasket. Viton gaskets are available as an option when EPDM may not be suitable for your application. The 2″ stainless steel bulkhead fitting comes standard without a gasket.
| Description | Hole Size Required in Tank | Part Number | Item |
|---|---|---|---|
| 1/2″ Heavy duty double threaded polypropylene fitting | 1 7/16″ | 62834 | A |
| 3/4″ Double threaded polypropylene fitting | 1 7/16″ | 60401 | A |
| •EPDM gasket for 1/2″ and 3/4″ (62834 and 60401) | 60402 | ||
| •Type B Viton gasket for 1/2″ and 3/4″ (62834 and 60401) | 60360 | ||
| 3/4″ Heavy duty double threaded polypropylene fitting | 1 5/8″ | 62798 | A |
| •EPDM gasket for 3/4″ (62798) | 62799 | ||
| •Type B Viton gasket for 3/4″ (62798) | 62800 | ||
| 1″ Double threaded polypropylene fitting | 2 1/4″ | 60427 | A |
| 1 1/4″ Double threaded polypropylene fitting | 2 1/4″ | 60403 | A |
| 1 1/4″ Anti-vortex polypropylene fitting | 2 1/4″ | 63065 | D |
| •EPDM gasket for 1″ and 1 1/4″ (60427,60403 and 63065) | 60404 | ||
| •Type B Viton gasket for 1″ and 1 /4″ (60427,60403 and 63065) | 60361 | ||
| •Anti-vortex adapter for 1 1/4″ (60403) | 62398 | ||
| 1 1/2″ Double threaded polypropylene fitting | 3″ | 60124 | A |
| •Siphon tube, 1 1/2″ x 4 15/16″ long | 63682 | ||
| •Siphon tube, 1 1/2″ x 12″ long | 63279 | ||
| 2″ Double threaded polypropylene fitting | 3″ | 60405 | A |
| 2″ Double threaded 316 stainless steel fitting, less gasket | 3″ | 61767 | |
| •EPDM gasket for 1 1/2″ and 2″ (60124,60405,63481 and 61767) | 60406 | ||
| •Type B Viton gasket for 1 1/2″ and 2″ (60124,60405,63481 and 61767) | 60523 | ||
| 2″ Standard duty double threaded polypropylene fitting (Maximum tank wall thickness = 3/8″) | 3″ | 63481 | E |
| 2″ Heavy duty double threaded heavy duty polypropylene fitting | 3 1/4″ | 63683 | B |
| •EPDM gasket for 2″ (63683) | 60336 | ||
| •Type B Viton gasket for 2″ (63683) | 60008 | ||
| •Siphon tube, 2″ short | 60335 | ||
| •Siphon tube, 2″ x 12″ long | 63262 | ||
| •2″ MPT vent cap with poly screen | 63266 | ||
| •2″ MPT vent cap, anti-vortex, without screen | 63316 | ||
| •Anti-vortex adapter for 2″ bulkhead fitting | 62399 | ||
| •2″ Polypropylene dust plug | 60021 | ||
| 2″ Self-aligning double threaded polypropylene fitting (Designed to install in dome of vertical tank above the liquid level.) | 4-1/2″ | 63668 | |
| •EPDM gasket for 2″ (63668) | 60331 | ||
| •Type B Viton gasket for 2″ (63668) | 60351 | ||
| 3″ Double threaded polypropylene fitting (hex nut as shown in photo C) | 4 1/2″ | 62299 | C |
| •EPDM gasket for 3″ (62299) | 60331 | ||
| •Type B Viton gasket for 3″ (62299) | 60351 | ||
| •2″ Polypropylene reducer for 3″ | 60330 | ||
| •Siphon tube, 3″ short | 60327 | ||
| •Siphon tube, 3″ x 12″ long | 63263 | ||
| •3″ MPT vent cap with poly screen | 63845 | ||
| 4″ Double threaded polypropylene fitting (hex nut as shown in photo C) | 5 3/4″ | 62171 | |
| •EPDM gasket for 4″ (62171) | 62785 | ||
| •Type B Viton gasket for 4″ (62171) | 62786 | ||
| •Siphon tube for 4″ | 62714 |
Bolted Fittings
Bolted polypropylene fittings are equipped with 316 stainless steel bolts and come standard with EPDM gaskets. Viton gaskets are available as an option for the fittings.
| Description | Part Number | Item |
|---|---|---|
| 3/4″ Polypropylene double threaded bolted fitting with ss bolts and EPDM gaskets | 60502 | A |
| 1″ Polypropylene double threaded bolted fitting with ss bolts and EPDM gaskets | 60505 | A |
| • EPDM gasket for 3/4″ and 1″ (2 required) | 60498 | |
| • Type A Viton gasket for 3/4″ and 1″ (2 required) | 60355 | |
| 1 1/2″ Polypropylene double threaded bolted fitting with ss bolts and EPDM gaskets | 60513 | A |
| 2″ Polypropylene double threaded bolted fitting with ss bolts and EPDM gaskets | 60516 | A |
| • EPDM gasket for 1 1/2″ and 2″ (2 required) | 60497 | |
| • Type A Viton gasket for 1 1/2″ and 2″ (2 required) | 60356 | |
| 3″ Polypropylene double threaded bolted fitting with ss bolts and EPDM gaskets | 62471 | |
| • EPDM gasket for 3″ (2 required) | 62048 | |
| • Type A Viton gasket for 3″ (2 required) | 63226 |
Stainless Steel Double Threaded Bolted Full Coupling Fittings
Bolts are threaded into the back plate of the fitting so there are no welds or bolt holes that can be potential points of leakage. Please review chart below to see which fittings come standard with a gasket and which ones come without a gasket. The gasket should be installed inside of the tank. Available gaskets are cross-linked polyethylene, EPDM or Viton.
| Description | Part Number | Item |
|---|---|---|
| 3/4″ 316 stainless steel double threaded bolted fitting, w/EPDM gasket | 64251 | B |
| 1″ 316 stainless steel double threaded bolted fitting, w/EPDM gasket | 64252 | B |
| •3/4″ and 1″ EPDM gasket (1 required) | 63205 | |
| •3/4″ and 1″ Type A Viton gasket (1 required) | 63224 | |
| •3/4″ and 1″ Cross-linked polyethylene gasket (1 required) | 62950 | |
| 1-1/4″ 316 stainless steel double threaded bolted fitting, less gasket | 63036 | B |
| •1-1/4″ Cross-linked polyethylene gasket (1 required) | 63041 | |
| 1-1/2″ 316 stainless steel double threaded bolted fitting, w/EPDM gasket | 64253 | B |
| •1-1/4″ & 1-1/2″ EPDM gasket (1 required) | 63426 | |
| •1-1/4″ & 1-1/2″ Type A Viton gasket (1 required) | 63225 | |
| •1-1/2″ Cross-linked polyethylene gasket (1 required) | 63042 | |
| 2″ 316 stainless steel double threaded bolted fitting, w/EPDM gasket | 64202 | B |
| •2″ EPDM gasket (1 required) (for fitting 63038 prior to 6/15/18) •2″ EPDM gasket (1 required) (for fitting 64202 after 6/15/18) | 63206 64196 | |
| •2″ Type A Viton gasket (1 required) (for fitting 63038 prior to 6/15/18) •2″ Type A Viton gasket (1 required) (for fitting 64202 after 6/15/18) | 63225 64197 | |
| •2″ Cross-linked polyethylene gasket (1 required) (for fitting 63038 prior to 6/15/18) •2″ Cross-linked polyethylene gasket (1 required) (for fitting 64202 after 6/15/18) | 62848 64198 | |
| 3″ 316 stainless steel double threaded bolted fitting, w/EPDM gasket | 64195 | C |
| •3″ EPDM gasket (1 required) (for fitting 63039 prior to 7/24/18) •3″ EPDM gasket (1 required) (for fitting 64195 after 7/24/18) | 63223 64199 | |
| •3″ Type A Viton gasket (1 required) (for fitting 63039 prior to 7/24/18) •3″ Type A Viton gasket (1 required) (for fitting 64195 after 7/24/18) | 63226 64200 | |
| •3″ Cross-linked polyethylene gasket (1 required) (for fitting 63039 prior to 7/24/18) •3″ Cross-linked polyethylene gasket (1 required) (for fitting 64195 after 7/24/18) | 63043 64201 | |
| 4″ 316 stainless steel double threaded bolted fitting, w/EPDM gasket | 64254 | |
| •4″ EPDM gasket (1 required) | 63690 | |
| • Type A Viton gasket for 4″ (1 required) | 63691 | |
| •4″ Cross-linked polyethylene gasket (1 required) | 63689 |
Stainless Steel Single Threaded Bolted Fittings
| Description | Part Number |
|---|---|
| 2″ 316 stainless steel single threaded bolted fitting, less gasket | 62847 |
| •2″ EPDM gasket (1 required) | 63206 |
| •2″ Type A Viton gasket (1 requiqred) | 63225 |
| •2″ Cross-linked polyethylene gasket (1 required) | 62848 |
| 3″ 316 stainless steel single threaded bolted fitting, anti-vortex, less gasket | 63233 |
| •3″ EPDM gasket (1 required) | 63223 |
| •3″ Type A Viton gasket (1 required) | 63226 |
| •3″ Cross-linked polyethylene gasket (1 required) | 63043 |
Stainless Steel Double Threaded Bolted Flanged Fittings
These fittings are designed to install in heavy wall tanks.
| Description | Part Number |
|---|---|
| 1″ 316 SS double threaded bolted fitting with SS long bolts & EPDM gaskets | 63972 |
| •1″ EPDM gasket (2 required) | 64154 |
| •1″ Type A Viton gasket (2 required) | 63978 |
| 1-1/2″ 316 SS double threaded bolted fitting with SS long bolts & EPDM gaskets | 63973 |
| •1-1/2″ EPDM gasket (2 required) | 64155 |
| •1-1/2″ Type A Viton gasket (2 required) | 63979 |
| 2″ 316 SS double threaded bolted fitting with SS long bolts & EPDM gaskets | 63974 |
| •2″ EPDM gasket (2 required) | 64156 |
| •2″ Type A Viton gasket (2 required) | 63980 |
| 3″ 316 SS double threaded bolted fitting with SS long bolts & EPDM gaskets | 64194 |
| •3″ EPDM gasket (2 required) | 64152 |
| •3″ Type A Viton gasket (2 required) | 63981 |
Stainless Steel Bolted Half Nipple Fittings
| Description | Part Number |
|---|---|
| 3/4″ 316 SS half nipple fitting, MPT, & cross-linked polyethylene gasket | 64093 |
Norweco’s plastic storage tank is constructed with rotationally molded polyethylene resin. It’s seamless construction makes it durable and resistant to cracks, chips, and ruptures. The poly tank was made with FDA approved resin that complies with FDA standards 21 CFR 177.1520 (1) 3.1 and 3.2 for use in food grade storage. It’s made with UV inhibitors that help protect liquid contents from direct sunlight for both indoor and outdoor use. Please verify chemical compatibility before placing your order.
Norwesco backs their polyethylene storage tank with a 3-year manufacturer warranty. Additional fittings and customization options are available.