
Newton Crouch Hoses and Hose Reels
Our equipment in Newton Crouch Hoses and Hose Reels is manufactured with a variety of hose types. Our parts department sells hose by the foot and can help you find the right hose for the product being transferred. We also sell a variety of hose reels to ensure you hose is easy to manage.
Newton Crouch Hoses and Hose Reels Types
Wire Reinforced EPDM Suction / Discharge Hose
- Wire Helix with Textile Ply Wrapped with Smooth Cover
- Safe for Variety of Liquid Requiring Elevated Pressure
- Hose ID: 1-¼”, 1-½”, 2”, 3”, and 4”
- Sold by the Foot. Specify Length When Ordering
EVA Tubing
- Semi-translucent Tubing made of Ethyl Vinyl Acetate
- Ideal for Herbicide, Pesticide, Anhydrous Ammonia Applicator Hose; Vacuum Hose, Sight Gauge
- Hose ID: 3/8”, ½”, ¾”
Clear Vinyl Tubing
- High Gloss Clear Tubing Made of Non-Toxic Crystal PVC
- Ideal for Water, Weak Chemicals and Acids, Sight Gauge, Drainage, Air Lines
- NSF-51 and NSF-61 Certified Material
- Hose ID: ¼”, 3/8” (1/16” Wall), 3/8” (1/8” Wall), ½” (1/16” Wall), ½” (1/8” Wall), 5/8”, ¾”, 1”,1-½”
PVC Lay Flat Discharge Hose
- Used as a Protective Barrier for other Hoses on NC Equipment
- Resistant to Abrasion and Aging
- Safe for Water Discharge
- Hose ID: 2”, 3”
PVC Standard Duty Suction Hose
- Safe for Water Light Chemical Solution
- Clear, Smooth Surfaces
- Flexible with Good Adhesion between Soft Wall and Helix
- Previously Used on NC Liquid Equipment; Replaced with PVC Bumble Bee
- Hose ID: ¾”, 1”, 1-¼”, 1-½”, 2”, 3”, 4”
Ag Spray Hose

- Safe for Water Discharge in Residential, Agricultural & Industrial Application
- ¾” Used on NC Liquid Sprayers and Applicators between Nozzles
- 2” Hose Used on NC Liquid Equipment as Protective Bumpers on Booms
- Hose ID: ½”, ¾”, 1-½”
PVC Bumble Bee HD Suction Hose

- Used on Newton Crouch Liquid Equipment
- Flexible with Good Adhesion between Soft Wall and Helix
- Safe for Water and Light Chemicals
- Hose ID: 1”, 1-1/4”, 1-½”
Nylon Air Line Tubing
- Unbraided:
- Ideal for Pneumatic Lines, Instrumentation Systems, Lubrication, Fuel, Oil, and Refrigerant Line
- Hose ID: ¼”
- Braided:
- Ideal for Material Handling, Water, Light Chemical Solutions
- 1/16” Wall
- Hose ID: 3/8”, ½”
Hose Reels
Titan Hose Reel Models 4312H, 4318H, 4312E, 4312E
- Heavy Duty Aluminum Frame
- Super swivel with Ball Bearing Support and Grease Fitting
- Aluminum Dish with PVC Spool. Plated Steel Hardware. Carbon Steel Manifold
- 2-Vane Semi Open Impeller
- Spring Loaded Pin-Lock: 4312H, 4318H
- Switch and Solenoid are Mounted on a SS Plate and Wired to 12 Volt Electric Motor: 4312E, 4318E

Titan Hose Reel Model 3012
- Economical Steel Reel
- Powder Coated
- Dimensionally Identical to 4312H

Summit Hose Reel
- 1/2″ or 1″ Inlet / Outlet Available
- Capacity up to 650′ of 3/8″ Hose
- All Reels are Pressure Treated and Powder Coated
Summit SM Series
- Steel Crank Handle with Free Turning Hand Grip
Summit SME Series
- 1/3 HP 12 Volt DC Motor
- Pre-Wired Heavy Duty Push Button Switch
- Solenoid Included and Mounted
